home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Almathera Ten Pack 2: CDPD 1
/
Almathera Ten on Ten - Disc 2: CDPD 1.iso
/
pd
/
051-075
/
073
/
runbackground
/
runbackground.c
< prev
next >
Wrap
C/C++ Source or Header
|
1995-03-13
|
7KB
|
246 lines
/*
--------------
runbackground.c
---------------
SUMMARY: A Workbench Disk can be used to autostart an application
through the use of the startup script and close the startup CLI.
Users have commented that it is not possible to start a process going
from the startup script and then cause the initial CLI to go away.
Here is the solution to that problem, named appropriately:
RUNBACKGROUND
which starts and runs a background task. This does indeed allow you to
create a startup script that will set up your workbench running any
programs you might wish, removing the initial CLI in the process.
Your s/startup-sequence can contain lines such as the following:
RUNBACKGROUND -3 clock
RUNBACKGROUND utilities/calculator
RUNBACKGROUND -5 utilities/notepad
where RUNBACKGROUND is the command and the second parameter is the filename
which may be preceded by a flag-variable that specifies an optional delay
time. The delay can be from 0 to 9, for the number of seconds that
the startup script should sleep while allowing the background task to
load and start. I've put that in to minimize thrashing of the disk as it
tries to load several projects at once.
LIMITATIONS:
The program that you run cannot require any input from an interactive
CLI that starts it. Additionally, you cannot specify any file
redirection in the command line since this program provides the
redirection for you already. If you need to use redirection for
your command, you can modify the source code where shown, thus
allowing the redirection to become one of the parameters passed
through to your program.
RUNBACKGROUND does pass your command line parameters to the program
you wish to start, but limits the total length of your command
string to 227 (255 minus the 28 characters for "RUN >NIL: <NIL: "
preceding your own file pathname and ">NIL: < NIL: " following it.)
LINKING INFORMATION:
(Amiga/Lattice C) use -v option for pass 2 (lc2 -v filename.q)
to disable stack checking code installation.
(stack checking code sometimes is incorrect).
FROM lib:Astartup.obj runbackground.o
TO runbackground
LIBRARY lib:amiga.lib, lib:lc.lib
**************************** NOTE: ********************************
If you use Lstartup.obj, it won't let the startup CLI go away. This is
because the source code for Lstartup.asm either opens its own window
or uses an existing CLI window (Open("*",....)), so that it has some
guaranteed place to put the output. Astartup.obj does not do this.
*********************************************************************
Hope this helps.
robp.
*/
/* runbackground.c */
/* Author: Rob Peck. 5/9/86 */
#include "exec/types.h"
#include "exec/memory.h"
#include "libraries/dosextens.h"
extern struct FileHandle *Open();
extern struct FileLock *Lock();
main(argc, argv)
int argc;
char *argv[];
{
LONG success, delaywillbe;
UBYTE commandstring[255];
char *test, *filename;
LONG fromparm;
struct FileInfoBlock *fib;
struct FileHandle *nilfh; /* NOTE: will hang around until next reset */
struct FileLock *lock;
fib = NULL; /* No file info block so far. */
delaywillbe = 1;
if(argc < 2 )
{
usage:
printf("Usage: RUNBACKGROUND [ -<loaddelay>] <name> [<parm(s)>]\n");
printf(" where optional loaddelay is 0-9,\n");
printf(" specified in seconds for the CLI\n");
printf(" to sleep, waiting for task to load\n");
printf(" (minimizes inter-task disk-thrashing)\n");
if(fib) FreeMem(fib, sizeof(struct FileInfoBlock));
exit(0);
}
/* See if there is a delay parameter present */
test = argv[1];
if(*test++ == '-')
{
filename = argv[2]; /* argv[1] is delay so argv[2] is file */
fromparm = 3; /* Copy parms from 3 to end */
if(*test >= '0' && *test <= '9')
{
delaywillbe = 1 + (50 * (*test - '0'));
}
if (argc < 3) goto usage; /* Only a delay, and no filename!! */
argc--; /* one less parm to copy */
}
else
{
filename = argv[1];
fromparm = 2; /* Copy parms from 2 to end */
}
/* Now see if the file exists! If not, it can crash the background
* CLI and take the system along with it.
*/
lock = Lock(filename,ACCESS_READ);
if(!lock)
{
test = filename;
if(*test == '?') goto usage;
else
{
printf("%ls: Command not found\n",filename);
goto usage;
}
}
else
{
/* If file exists, it better be a file and not a directory */
/* Unfortunately, it is difficult to tell if it is an executable
* file. If not executable, we'll still get blown out of the
* water, but that is up to the user to do it right!
*/
fib = (struct FileInfoBlock *)
AllocMem(sizeof(struct FileInfoBlock),MEMF_CLEAR);
if(!fib)
{
UnLock(lock);
printf("Ran out of memory!\n");
exit(0);
}
else
{
success = Examine(lock,fib);
if(fib->fib_DirEntryType > 0) /* its a directory!! */
{
printf("%ls is a directory, not a file!\n",filename);
goto usage;
}
}
FreeMem(fib, sizeof(struct FileInfoBlock));
UnLock(lock);
}
nilfh = Open("NIL:",MODE_NEWFILE); /* will always succeed */
strcpy( &commandstring[0], "RUN >NIL: <NIL: " );
strcat( &commandstring[0], filename);
/* REMOVE THIS NEXT LINE IF YOU WANT TO INCLUDE REDIRECTION IN
* THE COMMAND LINE FOR RUNBACKGROUND. (The line was installed
* to assure that something like "RUNBACKGROUND date ?" would
* not crash the system. "Date ?" is expecting to have an interactive
* CLI, and unless it is specifically told to direct its output to nil:
* it causes a crash. If the next line is removed, and you are careful
* about putting only NON-interactive commands in the command line,
* everything should be ok. Notice that if you do not specify a
* non-interactive file handle (named_disk_file or NIL:) for your
* program, it may still prevent the originating CLI from going away
* until your program ends. Also note that specifying two instances
* of the same redirection (">somewhere" or "<somewhere") for a
* background task crashes.
*/
strcat( &commandstring[0], " >NIL: <NIL: "); /* stop interactive crash */
argc--;
while(--argc > 0) /* Rebuild parameter string for passing it on */
{
strcat( &commandstring[0], " "); /* add a blank */
strcat( &commandstring[0], argv[fromparm++]);
}
success = Execute( &commandstring[0] , nilfh, nilfh);
/* The full command passed to Execute now looks like this:
*
* "RUN >NIL: <NIL: FILENAME >NIL: <NIL: PARAMETER(s)"
*
*/
if(success)
{
printf("Started %ls as a background task\n",filename);
/* Execute, in this case, returns IMMEDIATELY. The process
* that is loading the code that is to be run as a background
* process is working to get everything in and started.
*/
}
/* Now, to minimize thrashing between tasks, lets put this task to
* sleep so that the each task actually gets a chance to load.
*/
Delay(delaywillbe);
}
strcpy( to, from )
register char *to, *from;
{
do {
*to++ = *from;
} while( *from++ );
}
strcat( to, from )
register char *to, *from;
{
while( *to ) to++;
strcpy( to, from );
}